Re: Europa-List: Re: Cheap chinese landing light

[William Daniell <wdaniell.longport@gmail.com>]

Graeme

where would I put it?  Across the power and neutral?=8B

This light is for a bike and uses 12v.

Its pretty bright and uses little current so its fine apart from cutting
out all comms.  I will try a couple of ferrite chokes to see what happens

Will


William Daniell
LONGPORT
+57 310 295 0744

On Tue, Jun 13, 2017 at 1:41 PM, graeme bird <graeme@gdbmk.co.uk> wrote:

>
> I have a cheap Chinese landing light for mine which has a switcher voltag
e
> converter to allow up to 32v to be supplied. I haven't noticed any noise
> from it or impact on anything, however the led matrix 3 x 3 needs about 9
 v
> so a nice  quiet resistor would also do the job.
>
> --------
> Graeme Bird
> G-UMPY -  Mono Classic/XS FFW 912S, Woodcomp 3000/3W CS, trutrak Gemini 2
> axis AP, PAW, PFLARM core, ads-b out, 8.33khz, mode S, FP-5, Aera500, SD 
on
> Nexus, SmartA3
> 290 hours &amp; 5 years on the Mono, 930 total
> g@gdbmk.co.uk
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=470055#470055
>
>
===========
===========
===========
===========
===========
>
>