Hi David!
How much did you pay for a complete Beringer system?
They look so beautiful (and that 3 kg is a lot!)!
Are they always anodized to wine red or can you choose your favourite
colour by paying some extra?
Next time when you land here _w/o cows_ we will have sauna so long, that
you loose your weight another 3 kg ;)
and then get it rapidly back in the grill house!
Dear Fred!
Original mono brake lever works just fine - believe me!
My fingers are just like a bunch of dicks - I can still use easily
together my brake & throttle (even though I'm left-handed).
Just design some kind of parking brake system (valve or mechanical).
Brake lever to the stick looks - sorry - unaesthetic. Its something
like a part from a cheap moped or so.
And they are.
As an architect you know - _beauty first of all_ - safety, practicality
and such a things come secondary...
(how about mind, sight or speech controlled brakes - this would be a
sophisticated experimental solution)
Cheers, Raimo
OH-XRT Finland
allekirjoitus <http://www.flyingbreweryfinland.fi/>
<mailto:info@rwm.fi>
davidjoyce@doctors.org.uk kirjoitti 7.8.2017 klo 19:04:
>
> Fred, I have just fitted a Beringer wheel, brake, pressue limiter &
> brake lever to my plane. For me the beauty of the system resides in
> the wheel and brake, which save you 3kg and are claimed to be
> significantly more efficient than the standard kit. I have to say that
> fitting the brake lever to the stick didn't do it for me. I want the
> brake to be accessible from both seats. So I have produced a mod to
> mount the lever in more or less the same position as the standard one.
> So my question is why not go for the fullMonty? Then all the right
> fittings will turn up automatically!
>
> Regards, David Joyce, GXSDJ
>
> On 2017-08-07 10:10, philip george wrote:
>
>> Hi Fred
>> I think you will find that the elbow is M10x1.00 for the nylon pipe
>> the other side being 1/8 BSPT x28 . The origin of these fittings
>> along with the brake master cylinder was from a British Kart
>> component supplier. Hope this helps.
>> Phil George G-EORJ mono
>> Sent from my Samsung device
>>
>>
>> -------- Original message --------
>> From: Fred Klein <fklein@orcasonline.com>
>> Date: 05/08/2017 04:29 (GMT+00:00)
>> To: europa-list@matronics.com
>> Subject: Europa-List: Mono brake line
>>
>> Mono-drivers,
>>
>> The brake line connects to the puck w/ a 90 degree elbow threaded
>> fitting; the threads into the puck are British Standard Tapered Threads.
>>
>> Can anyone tell me the size of this 90 degree elbow BST
>> fitting...?...and...can anyone tell me the size and thread type on
>> the other end of that elbow which connects to the brake line?
>>
>> I ask these questions after just having ordered a stick-mounted
>> Beringer HAB02 hand brake lever.
>>
>> Fred
>> ==========
>> st Email Forum -
>> pa-List">http://www.matronics.com/Navigator?Europa-List
>> ==========
>> p; - MATRONICS WEB FORUMS -
>> ums.matronics.com
>> ==========
>> p; - NEW MATRONICS LIST WIKI -
>> matronics.com
>> ==========
>> p; - List Contribution Web Site -
>> p; -Matt Dralle, List Admin.
>> http://www.matronics.com/contribution
>> ==========
>>
>>
|