Hi David
I have Nev's cowls and mount
Fitted to G-MLXP Rotax 912S
All works great for me no overheating probs whatsoever
Cooling ducts need to be fitted and altered for each installation
I have Graham's fire wall not the stainless steel one. So may be different
to others
Cheers
Mike
On 23 Aug 2017 6:12 p.m., "david park" <dpark748@me.com> wrote:
I fitted Nevs Cowlings, with his help the week before he passed away.
I have the original engine mount with a 912ULS.
No problems fitting.
Nev provided templates for baffling but individual set ups need some
modification.
Regards
Dave Park G-LDVO
> On 23 Aug 2017, at 13:49, spcialeffects <spcialeffects@aol.com> wrote:
>
>
> I thought it might be of interest if we put together a post of who has
nev's cowls, what engine mount was used and what engine. The reason I
thought this might be a good idea is that when I was fitting mine there was
a lot of 'fettling' needed and when I did spoke with nev he was always
waiting on someone to send him photos. Also I think I am the only person
installing a rotax 914. So I'll start
>
> Engine : Rotax 914 turbo
>
> Engine mount: Europa
>
> Frank Xuereb classic kit 165
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=472084#472084
>
>
|