I have done both my avionics and instrument panels with 1.5mm Carbon sheet.
Dave Watts
G-BXDY Classic Mono 912S 2440 hours
> On 30 Oct 2017, at 09:32, JohnFrance <77alembert@gmail.com> wrote:
>
>
> Hi William,
> I recently installed a Trig radio and transponder on the right hand side of my
instrument panel.
> I did buy the aluminium panel from Europa but in the end I made the panel out
of 2 mm thick carbon fibre, the cut-outs were done using water jet. I think 1.5
mm carbon plate would be sufficient.
> I put the control heads in the panel and the rest behind the baggage bay
> bulkhead
in my classic.
> It was necessary to rewire the trim to allow the panel to hinge down for
> access
and of course all the other electrical items on the that panel.
> Access for maintenance will be much easier in the future.
>
> Regards
>
> John
>
> --------
> Europa mono Nr 192
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=473965#473965
>
>
>
>
> Attachments:
>
> http://forums.matronics.com//files/img_0733_217.jpg
> http://forums.matronics.com//files/img_0743_691.jpg
>
>
>
>
>
>
|
