Hi,
I feel it necessary to mention that in the UK under LAA rules a mod approval
will probably be required before fitting this item. I think the device may
indeed be a good idea but you cannot just fit it without approval.
Pete Jeffers (LAA Inspector for The Europa Club)
PS Rules applicable outside the UK probably differ
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of JohnFrance
Sent: 04 December 2017 09:47
Subject: Europa-List: Re: Rotax Oil Tank Drain Plug
Hello Jim and others who might be interested.
Just to confirm, the drain works well. I drilled a 1.5 mm hole in the casing
where the circlip washer goes to allow wire locking in position.
Cheers
John
[quote="Jim Kelly"]Hi John,
Please keep me posted Jim Kelly.
G-BWEG Classic Taildragger
Hello to all, this post made me think I need to fit one of these as well.
A quick search on the Internet yielded this result from Quick Valve in the
UK.
Model F107N has a nipple to allow a tube to be fitted and it costs 23.97
GBP plus postage. Mine is on it's way.
http://www.quickvalve.co.uk/f107n_details.htm
(http://www.quickvalve.co.uk/f107n_details.htm)
Regards,
John
--------
Europa mono Nr 192
--------
Europa mono Nr 192
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=476084#476084
---
This email has been checked for viruses by AVG.
http://www.avg.com
|