EUROPA ALUMINIUM FUEL FILLER PIPE
*Aluminium pipe is used to join the roto-polyurethane
=9Ccobra=9D fuel inlet tube to the fuel tank inlet.
*The Aluminium pipe is bent to 55 degrees
*The pipe is supplied with added length so it can be cut to the desired
length.
*Clean inside of pipe with a mild solvent or Motor gas.
*Cut fuel resistant rubber hose to join at both ends with Hose
clamps.
Supplied by Tim Ward.
12 Waiwetu Street
Fendalton
Christchurch
New Zealand
Phone 0064 3 3515166
ward.t@xtra.co.nz
2 Hose Clamps
Rubber Hose
2 Hose Clamps
Fuel Tank inlet
Aluminium Pipe
Fuel Tank
Plastic Fuel Filler
|