Bob,
I see this all the time in the US. Getting the black pipe is not easy as i
t is UK type pipe fittings are non aviation.
The 6mm tubing used is for Kart operations in the UK as are the fittings.
If Karen can=92t supply try cometkartsales.com for this specific tubing and
fittings may help.
Note For North American Customers: In my shop I convert the brake lines t
o all Matco for my clients when I can. Lines and fittings all match all th
e time. For those of you in the UK, I know the approval of same or better
using an aircraft brake manufacturer is quick and easy. I also note that,
on a re-plumb of a trigear, will use the 1/16 inch Matco lines and fittings
. Very good stuff and from a consistent manufacturer. Just slip the small
er line into the old tubing for a quick, permanent and properly operating r
epair. Some notes are in the .pdf attached.
Regards,
Bud Yerly
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Window
s 10
________________________________
From: owner-europa-list-server@matronics.com <owner-europa-list-server@matr
onics.com> on behalf of Bob Harrison <ptag.dev@talktalk.net>
Sent: Saturday, March 17, 2018 4:42:35 PM
Subject: Europa-List: Black Brake Pipe........
Thanks for your trouble Alan , as a result of Karen not grasping the differ
ence I have 5 meters of the same you have, which for my purpose is not requ
ired! I only require the 0.248 inches. Diameter.
Regards
Bob Harrison G-PTAG Kit337
|