Thanks Eric,
Ill look at theFlowscan during my research.
Mike
Sent from my iPhone
> On Jun 2, 2018, at 9:18 AM, Erich Trombley <erichdtrombley@juno.com> wrote:
>
>
> Mike,
>
> I have a single Floscan Series 200 flow meter which is incredibly accurate
> (typically
within a tenth of a gallon). It is connected downstream of the fuel selector
valve. I also have a fuel pressure/head sensor (thank you Jim Butcher)
mounted adjacent to the flow meter, and while not as accurate, it does provide
a good representation of whats actually in the tank. Both units are tied into
my Dynon Skyview which performs a cross check comparison between the two which
is really nice.
>
> I just recently disconnected the original sight gauge as I was never
> comfortable
with fuel in the cabin, and during the last annual inspection noted some fuel
staining on the carpet by the footwell.
>
> Good luck with the remained of your Phase I flight testing. Let me know if I
can help out.
>
> Erich Trombley
> N28ET Classic Mono 914
>
>
>
> ____________________________________________________________
> 1 Cup Of This (Tonight) Will Burn Your Belly Fat Like Crazy
> Wise Med
> http://thirdpartyoffers.juno.com/TGL3131/5b12c3437b1514343694cst04vuc
>
>
>
>
|