europa-list
[Top] [All Lists]

Re: Europa-List: Re: Jamar Brake Cylinder

Subject: Re: Europa-List: Re: Jamar Brake Cylinder
From: Karl Heindl <kheindl@msn.com>
Date: Sun, 1 Jul 2018 16:29:02
How did you force the fluid down, gravity, or pump ? Iguess it would work w
ith one of the rubber adapters forced into the reservoir opening, the vent 
hole sealed, and the nipple open with a container to catch the fluid ?


________________________________
From: owner-europa-list-server@matronics.com <owner-europa-list-server@matr
onics.com> on behalf of willydewey <willydewey@gmail.com>
Sent: 01 July 2018 16:39
Subject: Europa-List: Re: Jamar Brake Cylinder


I replaced the Janmar Brakes with Matco soon after I bought my aircraft
and have not for one minute regretted it..
Perhaps one, we had the same problem with DOT5 and bubbles until I question
ed why the reservoir is high up on the firewall  So contrary to advice I fi
lled up and forced fluid DOWN to the brakes,.....Bingo worked first time  T
hat was 3 years ago and no bubbles or spongy brakes  THe hold solid at 5000
rpm in fine pitch

--------
Give a wise man knowledge and he will be yet wiser


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=481321#481321



<Prev in Thread] Current Thread [Next in Thread>