Hi Steve,
Don't worry too much about disassembling. You will find that a smart tap
with a wooden mallet will get things apart ok . What it does mean is that it
is a little difficult to do 'in the field'. You do need a vice and workbench
and 6 hrs to allow the 638 to cure again before flight. But hey ho that is
Europa technology.
Pete Inspector to the Europa Club
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Steve Ivell
Sent: 01 August 2018 16:03
Subject: Europa-List: Nosewheel setup
Hi Folks
I'm about to fit the nosewheel and the manual says I should bond the axle to
the bearings with Loctite 638. I am really struggling with this idea as I
don't know how I will ever get the wheel apart to change a tube or tyre in
future.
Advice from builders most welcome??
Steve Ivell
Mob: 07971 128842
E-mail: steveivell@pestproof.co.uk
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam
paign=sig-email&utm_content=emailclient>
Virus-free.
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam
paign=sig-email&utm_content=emailclient> www.avg.com
|