I have had two leaks on mine; the first was from new and on the port side 1"
pipe
joint above the radiator, I concluded when shutting down the water, no longer
circulating, heated here from the exhaust and engine and wept out of the
vertical
joint. I changed to silicone pipe, wrapped it in insulation webbing and
used a better quality clamp.
The second leak was a tiny hole in the radiator.
--------
Graeme Bird
G-UMPY - Mono Classic/XS FFW 912S, Woodcomp SR3000/3W CS, trutrak Gemini 2 axis
AP, PAW, PFLARM core, ads-b out, 8.33khz, mode S, FP-5, Aera500, SD on Nexus,
Smart A3
350 hours & 6 years on the Mono, 930 total
g@gdbmk.co.uk
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=482089#482089
|