| Subject: | Europa-List: lock-wiring 912 sump banjo bolt |
|---|---|
| From: | Rowland Carson <rowlandcarson@gmail.com> |
| Date: | Sun, 18 Nov 2018 18:31:15 |
Im about to adjust the position of the oil sump banjo on my 912S, as advised in the Europa FWF manual. I note that the head of the banjo bolt is drilled and so I will lock-wire it after re-positioning the banjo. But I cant see any handy place nearby on which to anchor the lock-wire. Does anyone have any suggestions, or have I missed something really obvious? (quite likely!) in friendship Rowland | Rowland Carson ... that's Rowland with a 'w' ... | <rowlandcarson@gmail.com> http://www.rowlandcarson.org.uk | Skype, Twitter: rowland_carson Facebook: Rowland Carson |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Europa-List: Classic Spinner - front bulkhead for Airmaster, Klaus Dietrich |
|---|---|
| Next by Date: | Europa-List: order of assembly for cooling duct, radiators and hoses, Rowland Carson |
| Previous by Thread: | Europa-List: Classic Spinner - front bulkhead for Airmaster, Klaus Dietrich |
| Next by Thread: | Re: Europa-List: lock-wiring 912 sump banjo bolt, Richard Wheelwright |
| Indexes: | [Date] [Thread] [Top] [All Lists] |