Kingsley
thanks
What a good idea!
yours
Will
William Daniell
LONGPORT
+57 310 295 0744
On Tue, Feb 5, 2019 at 6:54 PM Kingsley Hurst <kingsnjan@westnet.com.au>
wrote:
> On 06.02.19 12:46 am, William Daniell wrote:
>
> < actually it wasnt that bad just a loud "clack" on opening the door.
> The door would open fine if I just pressed down on the top between the
> doors or up on the inside of the door. However I thought it was
> interesting and worth sharing. I will file it down a bit when I get
> round to it.
>
> Hello William,
>
> Firstly, congratulations on your achievement with respect to your epic
> journey. That's what I call a trip!
>
> Regarding your door problem, I had this trouble when I fitted my doors
> and found I was making very little progress trying to sand the edge of
> the doors for clearance. It suddenly dawned on me that a small spacer
> placed midway between the hinges on top of the door surround should work
> and to my delight it fixed the problem immediately. The packing has to
> be thick enough to ensure the surface of the top of the door is level
> with the corresponding surface on the fuselage. Try a piece of
> cardboard with sticky tape first if you have any doubts about it working.
>
> See photo attached.
>
> Regards
> Kingsley in Oz
>
>
|