Hi All,
Does anyone know an alternative part number for the large O-Ring in the Classic
brake caliper.
I found a post on here, from Jim and Heather, from 20/05/12 which said that it
appears to be a Cleveland 101-05200. This P/N maps on to MS28775-224 with an ID
of 1-3/4" and thickness 1/8". Converting this to metric it's 44.45mm ID and
3.175 thickness. I found HUG-Technik 42704450300 which has 44.5mm ID and 3.00mm
thickness - but this is grossly off. The ID is far far too big. (link :
https://www.hug-technik.com/shop/advanced_search_result.php?categories_id=0&keywords=42704450300&inc_subcat=1)
Because I discovered this during the overhaul of the brake system, I am now
without
a working brake! However, I measured the piston, and see that I need an ID
closer to 39mm.
The closest I can find from my O-Ring sources here, is Hug-Technik 42703900400
(link :
https://www.hug-technik.com/shop/advanced_search_result.php?categories_id=0&keywords=42703900400&inc_subcat=1)
with an ID of 39.00 mm but a thickness of 4.00mm... I did order it to see, but
the piston will not go back inside the caliper housing.
Best
Jon
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=489751#489751
|