DONT SIZE YOUR CONTROL STICK UNTIL YOU HAVE VERIFIED IT CLEARS THE PANEL AND
SWITCHES
IN FULL DIVE MODE, REMEMBERING CLEARANCE FOR YOUR KNUCKES AND SWITCHES.
REGARDS
BOB HARRISON .
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Kingsley Hurst
Sent: 15 November 2019 01:30
Subject: Re: Europa-List: Control stick tube height
Chris,
I have measured from floor to top of sticks on two aircraft for you . .
. . . . one is 19.7" and the other 20.9" so take your pick!
IMO, your 19" is plenty long enough.
Regards
Kingsley in Oz
On 15.11.19 8:42 am, n7188u wrote:
>
> Dear forum members,
>
> My control sticks seems to have modified at their end to fit Infinity grips
> (which
I am not going to use) and I need to check whether they were cut down to
make them shorter or not.
>
> I measured 19 inches from the floor to the top of the stick tube when the
> stick
was about vertical.
>
> Is this correct or if not how much was the stick cut down?
>
> Regards,
> Chris
|