Hi Group
I purchased a AVC1 regulator from B and C for Rotax 914. It has adjustable
voltage
set-point and adjustable low voltage warning. It has a very nice heat sink
that's coated with conductive Nickel Plating and has provisions for two grounds.
Here's information that was sent to me from them:
B&C now has a Ducati replacement regulator. Its a plug and play replacement, has
OV protection, warning light output with selectable LV setpoint, and adjustable
charging voltage. The unit has been tested by Vans Aircraft and needs no
additional
cooling. Purchase includes phosphor bronze connectors. Cheaper connectors
can get loose and arc. This caused many of the ducati units to fail. B&C
is running free shipping now too.
Relevant links:
Bandc.com/avc1install
bandc.com/wp-content/uploads/2020/04/QuickFacts_AVC1_2020.pdf
Nathan
Nathan Bainbridge
B&C Specialty Products, Inc.
123 East 4th Street
Newton, KS 67114
(316) 283-8000
bandc.com
Ron Parigoris
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=496436#496436
|