This is timely! My inspection of the throttle box discovered one of the cabl
e connections was very frayed right at the TH03 throttle cable eye, hanging b
y threads!
So I am looking at my options to stay with a similar install or going to sol
id wire. I imagine to stay =9Cstock=9DI will need to order a new
cable with the TH03 cable eye connected assuming they are available?
Other wise going Erich=99s route, which allows me to order via aircraf
t spruce.
For those of you who haven=99t inspected this for a while, might be wo
rth a look.
Thanks for any further thoughts.
Jerry
Mono 914
Sent from my iPad
> On Jun 17, 2020, at 3:43 AM, Kingsley Hurst <kingsnjan@westnet.com.au> wro
te:
>
> =EF=BB Thank you Erich, you have answered the question I was most conce
rned about. Please see my reply to Paul McAllister.
>
> Best regards
> Kingsley
>
> On 15.06.20 2:24 am, erichdtrombley@juno.com wrote:
>> Kingsley,
>>
>> I used solid stainless steel Bowden wire, .078" diameter. As I did my ow
n firewall forward I purchased bicycle cable, removed the twisted wire and i
nserted the solid Bowden wire. Regarding the connection to the throttle lev
er, I used AN111 Cable bushings as pictured below. Both items were purchase
d from Aircraft Spruce. Simply bend the end of the Bowden cable around the b
ushing forming a closed question mark (?) and secure it with Redux or JB Wel
d. Attach the cable to the throttle lever as per the Europa instructions. 1
7+ years of trouble free operation. Works a treat.
>>
>> Regards,
>> Erich
>> N28ET Classic Mono 914
>>
>> <image001.jpg>
>
|