Hi! Gordon,
I never understood it possible to have a Europa throttle cable too long?
Mine went through the firewall and took a huge loop( almost to the front of
the cowl before returning back to the carbs for easy and free operation for
alignment to the carbs point of entry.( no clips or tie wraps needed)
Regards
Bob Harrison EX G-PTAG.
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of GBWFH2010
Sent: 01 July 2020 10:04
Subject: Europa-List: Classic throttle cables
I had the misfortune to suffer a throttle cable break last week, fortunately
whilst on the ground.
It would seem that Europa only stock one size of cable which are designed
for the XS and these are much longer than the original Classic cables. The
problem is not the inner as these can be cut, but the outer which is about
30cm too long. At present my only solution is to use the new inners with the
Old outers, but I just wondered if
anyone with a Classic has encountered this problem and if so how you
resolved the situation.
Dave at Europa is investigating as he was unaware the Classic required
shorter cables, but this does not help at the moment!
--------
Gordon Grant
G-BWFH
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=497111#497111
This email has been scanned by BullGuard antivirus protection.
For more info visit www.bullguard.com
|