The former.
On a related question, has anyone replaced their electric flaps with a manual
system
(but not the mono system of levers and rods)?
The Motion Systems servo requires increasing amounts of commutator cleaning (now
down to about 10 hour cycles, which is too much, and has been a problem on RVs
too).
Duncan McF.
> On 15 June 2021 at 11:30 flyingphil2 <philipjtiller@gmail.com> wrote:
>
>
>
> A quick question for tri-gear owners.
>
> Do you lower your flaps by holding your finger down on the flap switch until
the motor drives the flaps to the correct setting?
>
> Or
>
> Do you have a clever switch that you can just press and let go and the motor
drives the flaps to half flap, followed by another press to drive the flaps to
full flap?
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=502374#502374
>
>
>
>
>
>
>
>
>
|