Tony, I had the impression when I built mine that 5his was standard
build requirement rather than a mod. It has worked well for 20 years.
Could be that it also lets some or all of the water that comes in if you
fly though rain (which of course in the UK we are prone to!) out again.
In fact I have flown through quite a bit of rain but have never found
any water in my Andair gascolator, which is situated at thr lowest point
in the system.
Regards, David Joyce, GXSDJ
On 2021-06-24 12:27, tonyvaccarella wrote:
> <tony@weimagine.com.au>
>
> I only just became aware of this Mod that drills 2 x 1/8EUR holes at
> the rear of the fuel vent. From what I read, itEUR(tm)s intent is to
> prevent too much pressure being developed in the forward facing vent
> and therefore within the fuel tank.
>
> Having some EURpitotEUR pressure, I would have thought, would be
> desirable.
>
> Im interested to know who has incorporated this Mod and would you
> recommend it? Europa lists it as desirable.
>
> Thanks
> Tony
> Sydney Aust
>
> --------
> Tony Vaccarella
> Mascot NSW 2020
> Sydney Australia
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=502573#502573
>
|