Hello Pete,
I=99m at a loss to understand how the tailplane incidence can be set w
ith a fully flying tailplane. Is there an explanation please?
Best regards
Your antipodean cousin
Kingsley
Sent from my iPhone
> On 27 Dec 2021, at 9:10 pm, Peter Jeffers <pjeffers02@gmail.com> wrote:
>
> =EF=BB
> Just remember that during build you are allowed a tolerance of round about
1 degree in the tail plane incidence. This is enough to change your trim se
ttings for any particular situation. It will also explain differences betwee
n various aeroplanes.
> Pete J
>
>> On Sun, 26 Dec 2021, 13:53 Bud Yerly, <budyerly@msn.com> wrote:
>>
>>
>> Get Outlook for Android
>>
>> From: Bud Yerly <budyerly@msn.com>
>> Sent: Saturday, December 25, 2021, 7:35 PM
>> To: europa-list@matronics.com
>> Subject: RE: Europa-List: Trim setting question
>>
>> As Tim said.
>>
>> Most do not trim in slow flight or stalls to notice the up trim. =46rom t
akeoff to cruise it is all down trim.
>>
>>
>>
>> Your CG is a bit farther aft so more down trim is needed in some cases as
the incidence of the wing is roughly 2.5 degrees nose down trim is needed a
s speed increases
>>
>>
>>
>> Happy Holidays,
>>
>> Bud Yerly
>>
>>
>>
>> From: owner-europa-list-server@matronics.com <owner-europa-list-server@ma
tronics.com> On Behalf Of Pete
>> Sent: Saturday, December 25, 2021 4:27 PM
>> To: europa-list@matronics.com
>> Subject: Re: Europa-List: Trim setting question
>>
>>
>>
>> Thx Tim, its good to know im not alone :)
>>
>>
>>
>> That said, the tab is neutral, with the stab in line with the fuse mouldi
ng, with the indicator also at neutral - so it appears the stab is not lined
up with the fuse moulding in flight. I find that odd.
>>
>>
>>
>> Cheers and Merry Christmas!
>>
>> PeteZ
>>
>>
>>
>>
>> On Dec 25, 2021, at 4:21 PM, timward <ward.t@xtra.co.nz> wrote:
>>
>> =EF=BBHi Pete,
>>
>> I have exactly the same issue but can live with it. Altering it is a real
gymnastic exercise with space available and spanners!
>>
>> Cheers,
>>
>> Tim
>>
>> Sent from my iPad
>>
>> Tim Ward
>>
>> 12 Waiwetu Street,
>>
>> Fendalton,
>>
>> Christchurch, 8052
>>
>> New Zealand.
>>
>> ward.t@xtra.co.nz
>>
>> 021 0640221
>>
>>
>>
>>
>> On 26/12/2021, at 8:49 AM, Pete Zut <peterz@zutrasoft.com> wrote:
>>
>> =EF=BB
>>
>> Curious: My CG is a reasonable 60.86" yet I find that my trim is general
ly set quite far down in most phases of flight (and never nose up trim).
>>
>>
>>
>> Is this what other folks are seeing?
>>
>>
>>
>> Cheers and thx,
>>
>> PeteZ
>>
>> C-GNPZ classic 912S
>>
>>
|