Are you referring to the W26C/W26A assembly? With loctite?? I doubt it,
but am thoroughly confused about what you are glueing together.
On my plane, the W26C/W26A/Pip-pin assembly is causing the forward/backward
wingtip slop, due to tolerance clearance stack-up.
Cheers and thx,
PeteZ
On Thu, Sep 15, 2022 at 4:48 PM JDA <johndavidamos@gmail.com> wrote:
>
> Update to my wobbly rear wing pin issue (the metal pin on the wing root
> behind the main spar)... It was "rocking" slightly within its thread. MOD
> 52 and MOD 74 had been carried out. I spoke to Andy Draper who deduced that
> the Loctite had either failed, or insufficient had originally been
> applied. He said that it was probably not significant structurally but
> might be a fretting issue. He recommended applying a "wicking" loctite to
> the thread which should penetrate by capillary action - rig before it sets!
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=507889#507889
>
>
|