Curious, how is it supported in the back? Mine is spaced away from the
firewall.
Thx!
PeteZ
> On Mar 27, 2023, at 4:11 PM, n7188u <chmgarb@gmail.com> wrote:
>
>
> BTW, I did a little number crunching of my own. I measured all the templates
I used to cut the airbox sound deadening material and calculated the weight for
the Noico material I used.
>
> 0.6 kg or 1.3 lbs. It is significant for a single component but for now I'll
keep it.
>
> Regarding the effect of this additional mass on the carburetor mounts, the
> airbox
is well supported on the back. But that's not to say it has no effect on
the carb rubber mounts so I will just double the inspections on that area.
>
> Chris
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=510527#510527
>
>
>
>
>
>
>
>
>
|