Hello intrepid flyers,
An inspection recently showed that the trailing edge deflection on my Europa XS
was not to spec. We adjusted the rod-ends at the end of the pitch tube but we
only managed to get 12 deg up and 3 deg down (total of 15 deg overall
deflection).
Any further adjustments would either provide an increase in the up direction
with a corresponding reduction in the down direction - maintaining the 15
degree overall deflection.
Mass balance weight does not touch its limits and the anti-servo T-Bar is free
and does not hit the fusalage.
Can some wise builder advise the method used to increase the full deflection
range
- Id like to get about 16 to 18 degrees if possible.
Many thanks to all
Tony
--------
Tony Vaccarella
Mascot NSW 2020
Sydney Australia
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=513387#513387
|