Europa-List: Beringer Wheel for Monowheel

[Erich Trombley <erichdtrombley@juno.com>]

> Hi Guys,
> 
> I am in the process of installing a Beringer wheel on my mono and noted that 
> the spacer that is installed on the port side of the wheel Is proud of the 
> axel.  See picture.   Is this normal?   
> 
> I ask because I have to push apart the swingarm to get the wheel in place.  
> Without the spacer on it slides right into place.  I am thinking I need to 
> trim the spacer to length such that it’s is flush with the end of the axle.  
> BTW, I verified that the axel is fully seated against the inside face of the 
> S.B bearing.  
> 
> I thought I would reach out to this group before contacting Beringer as I 
> know a few folks have installed this wheel.
> 
> Thanks.
> Erich Trombley
> N28ET Classic Mono

>