I bought a nice AMP crimper at CompUSA for $50.00 a couple of years ago. It
would crimp RG-58/59 and 63 and the center conductor.
"Through Complexity there is Simplicity,
Through Simplicity there is Complexity"
David L. Blair - CBS, MCP 1-813-978-6073 (Office)
Banyan Systems, Inc. 1-888-964-8049 (Pager)
On-site Banyan Consultant at GTE 3rd Level Banyan Support
---------- Original Text ----------
From: "David Glauser" <dg@xpsystems.com>, on 6/2/98 6:50 PM:
Even here in the US, AMP wants around $700 or so for their crimping
tool, or so I've been told. Bob Nuckolls sells the best substitue he's
found through his web site for around $40 US. See www.aerolectric.com.
> -----Original Message-----
> From: Tony Krzyzewski [SMTP:tonyk@kaon.co.nz]
> Sent: Tuesday, June 02, 1998 13:54
> To: Andrew S. Wainwright; europa@avnet.co.uk; Jerry
> Subject: Re: BNC
>
> The best crimping tool I know of is the AMP crimping tool. It has a
> number of
> interchangeable heads so it becomes a multi purpose tool. RS charge a
> ridiculous amount for it so I would ferret out the UK branch of AMP if
> you
> want to save some money!
>
> Tony
>
> ---------------------------------------------------
> Tony Krzyzewski tonyk@kaon.co.nz
> Managing Director Ph 64 9 520 4631
> Kaon Technologies Fx 64 9 520 3321
> Auckland New Zealand
>
> Networkers visit www.kaon.co.nz
> Aviators visit www.kaon.co.nz/europa/272index.html
> and www.kaon.co.nz/saanz/
> ----------------------------------------------------
>
|