Hmm, seen something similar but simpler fitted to large vertical opening
Double glazed windows and some doors, to pull in the corner.
This involves two pieces of plastic near the pivot, one piece being shaped
at a 30 degree point attached to the unit, and a 45 degree bevel attached
near the corner of the frame in line with the pivot.
Illustration of the open position...
*
*
* *
* *
* * * ______________
\
\
\ Part attached to frame
\
\__________
Illustration of the closed position...
_____________
******\
Part *\
Attached *\ Part attached to frame
to Unit * \
****** \_________
Constructed with elongated holes in the part attached to the frame to allow
for adjustment.
cheers
Paul.
Paul R. Sweeting
HP Certified Professional - HP-UX System Administration
IBM Global Services UK - Ntl Outsource
* ntl: paul.sweeting@ntl.com
* ibm: sweetip@uk.ibm.com
> -----Original Message-----
> Subject: RE: Door strut question - addendum
>
>
> A quick concept sketch can be found at:
> http://www.zutrasoft.com/europastuff/
>
> Cheers,
> Pete
> A239
>
> -----Original Message-----
> Subject: Re: Door strut question - addendum
>
>
> Sounds like a good Idea to me. Please keep us posted. How
> about a drawing?
> Thanks!
>
> SteveD
> A217
>
The contents of this email and any attachments are sent for the personal
attention
of the addressee(s) only and may be confidential. If you are not the intended
addressee, any use, disclosure or copying of this email and any attachments is
unauthorised - please notify the sender by return and delete the message. Any
representations or commitments expressed in this email are subject to contract.
ntl Group Limited
|