Yes I did ask them before posting here, but surprise and request for
their location was ther response. To answer this really needs a map or
photo, but there are two areas on G-EMIN. The first is on the underside
and consists of a major streak around 2 feet long 1" wide at about 15
deg. to the longit. axis running from abreast but outboard of the
starboard flap tube hinge bracket backwards, paralleled by two shorter
ones a couple of inches further inboard. These are around 1.5mm max deep
(somewhat less on the inside of the fuselage). The second area is just
ahead of the port wing leading edge where serious distortion (2mm) shows
running upwards at 45 deg. approx. Part of it overlaps the contact area
of the thigh rest which seems to be well reduxed still. Will try to bring
some pictures to Gloucester.
gemin
|