> I hate to say this, but did you check the angle with a digital level...?
Yes, I have 0.8 degrees of washout along its full length.
> My port flap has an undersized block needing shimming up, (um... they're all
> like that...) but both flaps had very little washout built in.
>
> I've now checked the ailerons -the section has a constant angle, and both
> have just under 2 degrees of washout. (instead of about 1/2 degree -derived
> from assuming constant twist)
Mine has 0.9 degrees.
Now if I add the two together I get 1.7 degrees across the complete
wing compared with 1.5 planned. The challenge of course is to ensure
that I do get 1.5 degrees of washout when I layup my wing :-)
Tony
>
> Cheers,
>
> Miles
>
>
>
|