> A question for those who have completed their wings. With everything on
>top of the wing looking flat, (at the aileron/flap area) on the bottom of
>the wing the trailing edge matches, but the leading edge of the flap is
>approximately 1/4 inch thicker. Is this normal for this? Everything else
>fits good on the wing except this. Any info appreciated.
>
> Thanks,
> Jim Thursby
It sounds to me as if the flap is too far aft.
The leading edge of the flap should be approximately 3mm from the vertical
face of the flap close-out.
Andy
-------------------------------------
Web Site at www.europa-aviation.co.uk
Fax No 44 1751 431706
-------------------------------------
|