> There will be
>pain lining up the quick connect pivot bolts. Install and set up the wing lift
>pins before putting the top on.
>
The reason that the manual calls for the setting up for the wing lift pin
sockets after the fuselage top has been bonded on is due to problems
experienced whilst building the production prototype G-ELSA. The
flexibility in the fuselage may allow things to move sufficiently for the
pins and sockets not to line up after the top is added. If you ensure that
nothing will move then you may get way with it.
Andy
-------------------------------------
Web Site at www.europa-aviation.co.uk
Fax No 44 1751 431706
-------------------------------------
|