>Reply to John Moran:
>You are right, there is a conflict in that the seat belt bolt is behind the
>pulley, which is a niusance. IMHO it might be better if the plate was larger,
>then the spacers wouldn't be needed and the rudder cable would be closer to the
>side of the console. Easier then to bury them in nylon tube bonded to the
>structure.
>Thoughts Andy and Roger?
>Graham
>
The insert for the seat belt / rudder pulley has been increased in size in
the later kits. The solution to any conflict between pulley and seat belt
mounting bolt on earlier kits is to move the pulley 0.5 inches aft or
slightly more if needed.
Regards
Andy
|