Thanks for all the feedback on this. Concensus opinion is that the tip
flanges are about 5mm too long. Thank goodness for Permagrit sanding splines
:-)
Have a good one.
Tony
------------------------
From: ChuckPops@aol.com
Subject: Re: Aileron Length
Date: Thu, 11 Sep 1997 08:23:55 +1200
> Hi Tony-
>
> On my wings, the inner face of the ailerons overlap the outer face of the
> bellcrank hole by about 1/8 inch. The overall fit looks good, with about
2mm
> clearance between aileron and flap. I sanded the tip flange until the fit
> was proper, perhaps removing as much as 5mm.
>
> Happy sanding!
>
> Pops
> US A-36
>
>
>
---------------End of Original Message-----------------
---------------------------------------------------
Tony Krzyzewski tonyk@kaon.co.nz
Managing Director Ph 64 9 520 4631
Kaon Technologies Fx 64 9 520 3321
Auckland New Zealand
Networkers visit www.kaon.co.nz
Aviators visit www.kaon.co.nz/europa/272index.html
and www.kaon.co.nz/saanz/
----------------------------------------------------
|