D.Howard@kid0110.wins.icl.co.uk wrote:
>
> Timothy, I had what sounds like the same problem with my Torque Tube, i.e.
> when it had been setup there was a significant amount of play. I concluded
> that I had assembled the tailplane components in a different manner to
> which it was manufactured by the factory. I drilled out 1 set of bushes,
> tried all (4 maybe) combinations of the various bits which slide on and
> off the torque tube until I found a combination in which the pins fitted
> snugly but more importantly a combination in which there was no play.
> Drilling out the TP13 bushes is very easy and you may want to investigate
> this before you go re-drilling holes in the torque tube.
>
> To any new builders I suggest you clearly label the items on the torque
> tube before you pull it apart for the first time.
>
> - Dave Howard
> #309
>
will check that before reaming out hole.Thanks,
Tim
--
Timothy. P. Ward
26 Tomes Road
Papanui,
Christchurch 8005
NEW ZEALAND
PH 64033525726
Fax 64033525726
Email: ward.t@xtra.co.nz
|