Alan Burrill wrote:
>
> Page 7-11 of constructors manual details cutting a 13mm hole through the
> leading edge root core for the Pitot tube.
>
> As this involves cutting through the rib flange laid up on the core, is
> it not easier to cut this hole before attaching the cores to the spar?
>
> --
> Alan Burrill
Alan,
I did exactly that.The amount of movement in boring the hole in the root
core while nicely set in place for the wing L.E layup, may spoil your
day.
I think I am also going to feed through my pitot and static tubes in
place while bonding cores to the port spar.
Cheers,
Tim
--
Timothy. P. Ward
26 Tomes Road
Papanui,
Christchurch 8005
NEW ZEALAND
PH 64033525726
Fax 64033525726
Email: ward.t@xtra.co.nz
|