Tony,
What method of stabilising our module did you use? An Aussie builder I know
has braces all over the place, all screwed up. Did you do similar?
Reg
Tony R.
>I had a good play at the weekend. I found that if I flipped the cockpit
>module the right way up with the module sitting in its "natural" position the
>controls freed up considerably but still had some binding. With careful
>observation it was apparent that the binding was from the front bearing where
>the circular flange is extended to become the control stick holder.
>
>I dug out some fine sand paper and lightly sanded back the front of the
>tufnol and soon regained my freedom of movement.
>
>If I turn the module upside down the controls do stiffen up but I am certain
>that is being caused by flexing of the fiberglass.
>
>Tony
>
>---------------------------------------------------
>Tony Krzyzewski tonyk@kaon.co.nz
>Managing Director Ph 64 9 520 4631
>Kaon Technologies Fx 64 9 520 3321
>Auckland New Zealand
>
>Networkers visit www.kaon.co.nz
>Aviators visit www.kaon.co.nz/europa/272index.html
>and www.kaon.co.nz/saanz/
>----------------------------------------------------
>
>
|