Well that's it for the feedback I received. If there are any discrepancies or
errors they are all mine.
Other things to note....
Don't paint the lower half of your aircraft in dark blue - it gets really hot
when your plane stands in the sun for a week.
A centre alignment pin on the door is a good idea if you don't want your
shirt sleeve to get sucked out of the aircraft.
The old tailwheel configuration can be quite exciting on takeoff (guess who
got to fly left seat in a Europa for the first time :-) Even got to invert
the green and blue bits :-)))))
If you don't like wiring the XS harness is a good buy. Documentation is
excellent.
Lynn's aileron electric trim tab is a very nice idea. Piece cut out of the
aileron, MAC S9 servo buried in the aileron. Very cute.
Lancair's aileron trim is basic - a piece of MS21003-5 hinge attached to the
aft edge of the aileron!
Permagrit's curved sander with the grit on the inside is a must have.
PolyFiber's finishing system is excellent. Forget fishing line application of
the filler - just apply it with a metal blade.
3M velcro sanding blocks with built in vacuum attachment are _neat_. See your
local panelbeater supply shop.
The Europa sweatshirts shrink when you wash them!
Tony
---------------------------------------------------
Tony Krzyzewski tonyk@kaon.co.nz
Managing Director Ph 64 9 520 4631
Kaon Technologies Fx 64 9 520 3321
Auckland New Zealand
Networkers visit www.kaon.co.nz
Aviators visit www.kaon.co.nz/europa/
and www.kaon.co.nz/saanz/
----------------------------------------------------
|