Re: Fuel Tank Inspections and Gages

[Roger Sheridan <rogersheridan@btinternet.com>]

Hi Chuck,

I fitted the 24 inch bendable Microflight probe and have tested it in situ -
satis.
Quality of unit & instructions very good. As pointed out, single bend only
which negates a proportional readout, but I have calibrated the gauge face
at 1/4, 1/2 & 3/4 full positions.
Access is via port headrest with probe bend taking tip to lowest point.
Gasket bolts can be tightened in situ but replacement would require headrest
surgery - not fun but by no means difficult.

Best regards,

Rog Sheridan.