Re: Rudder Shaft Sealing

[David Watts <dwatts@ns1.avnet.co.uk>]

>Has anyone come up with a bright idea for sealing around the rudder pedal 
shafts where they go through the side of the footwell.

Take a piece of the firewall material and cut out 2 pieces about 2-3 inches 
square. Now in each piece drill two holes to match the diameter and spacing 
of the cross tubes. Now cut each piece in half, through the hole centres and 
mount with self tappers or whatever to surround the tubes.

Dave Watts 'XDY