<< If you don't fit a charge indicating lamp, leave L disconnected.
Terminal C is the control terminal.Battery voltage is sensed and
charging_regulated accordingly.C must be connected to battery when engine
is running,and disconnected when master switch is off,or battery will
discharge slowly.
Nigel Beale.
> >>
Can a LED + diode + resistor be used in place of a lamp? Is a zener needed in
series to avoid illumination due to the cyclical nature of the L output? What
is the nature of the output from L?
I would prefer a LED since they are more reliable and easier to mount. It's
tough to reason through things like this given the minimal information in the
Rotax and Europa manuals.
John A044 Newtown, CT
|