europa-list
[Top] [All Lists]

Re: TRIMMING aileron clearance

Subject: Re: TRIMMING aileron clearance
From: Gerry Holland <gnh@ddsc.demon.co.uk>
Date: Mon, 29 Mar 1999 23:09:02
Fergus Hi!

Hope all's well with you.

>By the way, I opted for Proprietary Software
>Systems "Sport" model Angle of Attack sensor/indicator. It installs
>easily in the wing IF you have left some means of entering the tip area.
>I plan to use it for landings, takeoff, endurance testing, best glide
>(hope we don't need that) and any other Best Lift/Drag Ratio need.

A couple of us in the UK are fitting the same device, applying for
official PFA Mod. status and with guidance or a 'view' from Andy Draper.

I liked the Lift Reserve device also but preferred the Prop. S/W version
as only 'surface' ports are required. One less bit hanging off wing to
'bash' off.

Will be fitting the 'Wing Kit' in next few days at about 20% chord in
starboard wing about 4' from tip. Means making a small inspection access
hole in under surface of wing but should work out OK.

Easier for us due to XS Wing Kit. Best of luck.

Will keep you informed.

Regards

Gerry

Bldr. No. 384 G-DDSC
Gerry Holland
Intranet Solutions Inc.
Website: http://www.intranetsol.com

gerry.holland@intranetsol.com
gnh@ddsc.demon.co.uk

Mobile  +44 (0) 7808 402404
Office  +44 (0) 1761 435706
Fax     +44 (0) 1761 432472


<Prev in Thread] Current Thread [Next in Thread>