Re: Retraction Lever Guide Plate

[Graham Singleton <grasingleton@avnet.co.uk>]

>I have finished up the gear retraction lever and guide plate, and the
>manual states that we should redux this permanently to the tunnel.
>Shouldn't this be left free to be fastened down over the tunnel
>upholstery?  

Yes, that's the best plan. Stick a couple of anchor nuts on the tufnol to
make assembly easier. I tend to do this with anything where you can't
easily get to both sides at the same time. Counterbore the holes so that
the rivets have room to expand.

graham