Steve Hi!
>I'm trying to place the pre-formed wing/aileron closeout (the mysterious
>"diamond" piece of lore) and...well...I can't. It doesn't seem to fit
>very well. I've tried trimming some of the wide (leading edge) section
>as that was keeping it from sliding back into the section at the
>trailing edge, but it still hangs up about a 1/4 inch in front of the
>trailing edge.
>
I do remember a similar situation myself.
I used my Permagrit Sander to sand down the 'pointed' end to a sharper
point to ensure that the trailing end fitted snugly. It did!
Then Reduxed it into place and filled rest with 'Superfil'.
It came out fine!
Regards
Gerry
Europa 384 G-DDSC
*** PLEASE NOTE THE CHANGE OF DIRECT PHONE AND FAX NUMBER ***
Gerry Holland Direct Line : +44 1761 435706
or : +44 7071 227887
IntraNet Solutions Inc Switchboard : +44 1753 701072
Strategic Business Manager EMEA Operations Direct Fax : +44 1761 437590
The Nova Building, Herschel Street Mobile : +44 7808 402404
Slough, Berks. SL1 1XS
mailto:gerry.holland@intranetsol.com
Corporate Office:
8091 Wallace Road, Eden Prairie, MN 55344
Tel No. 001 612 903 2000
Corporate Web Site : http://www.intranetsol.com
UK & Europe Web Site : http://www.intranetsol.co.uk
|