My black plastic end broke off first time someone brushed against the wing
in the workshop. I have plugged the end with redux and drilled a static vent
a cm or so from the front.
Tony
---------------
Tony S Krzyzewski Kaon Technologies Ltd
Managing Director PO Box 9830, Newmarket
Ph 64 9 520 4631 Auckland
Fx 64 9 520 3321 New Zealand
Reply to tonyk@kaon.co.nz
Networkers visit www.kaon.co.nz
Aviators visit www.kaon.co.nz/europa/
---------------
-----Original Message-----
From: Terry Seaver <terrys@cisco.com>
Date: 24 November 1999 07:52
Subject: Where's the static?
>Hi all,
>
>in our XS kit we received a fitting with
>two tubes sticking out, supposedly pitot
>and static. Both tubes are open in the end,
>making it two pitots and no static.
>I haven't seen anything in the manual
>about plugging one and drilling holes
>in the sides.
> Is there some fitting to be bonded into
>one of the tubes?
> Or, just plug the end and drill some holes
>in the sides of one of the tubes? How many
>holes and what size?
>
>Terry Seaver
>#A135
>
>
|