Hi!Europa Builders, Herewith copy of further message from Paul Waxman of
SPOT ON Co. Which you new builders will certainly be interested in.
Regards
Bob Harrison Kit337 G-PTAG
-----Original Message-----
From: Paul A Waxman [SMTP:SpotOnCo@compuserve.com]
Sent: 24 November 1999 22:43
Subject: SmartTool Digital Levels & Wedge Protractors
Dear Bob
Many thanks for the e-mail copies and your kind words - much
appreciated.
For the record we also stock the Wedge PRO 360 & 3600 Digital
Protractors.
These products come from the same factory in California as the SmartTool
and are primarily designed for engineers and structural surveyors. They
have
a metal I-beam frame and have a similar transducer. However, they only
one function, degrees. The PRO 360 - 0.1=B0 degrees and the PRO3600 -
0.01=B0
with an RS232 port for downloading data. Both these models have a ZERO
set
feature which I believe could be of interest if the project is not
set-up
horizontally
in both the X & Y axes. The promotional prices are =A3189 and =A3319
respectively.
We also have the Spot-On Digi-Angle Measure and Level, this is similar
to
Bosch. Ours is 350mm long, reads to 0.1=B0 from 0-185=B0 and costs
If you let me have your address or fax no I will send you data sheets on
both
models.
The trapizoidal SmartTool was discontinued 4 years ago.
Just another point. I designed the original transducer for these tools
over 20
years ago and held world patents. Unfortunately I could not afford to
continue
has turned the full circle and I now have the final products for
distribution!
Trust that this information will be of interest.
Best regards
Paul A Waxman
paul@spot-on.net
|