>To all you folks using a 914 turbo can anyone please advise me on the
>location of the waste gate motor control. The manual states it should be
>mounted in the cabin on top of the tunnel. Later the manual states to
>install the stiff nuts for mounting the unit on the top of the tunnel.
>Does this infer the unit is located on the underside of the top of the
>tunnel? I am confused.
We've got it on top of the tunnel with the stiff nuts on top as well.
>If the unit is in fact mounted on the top of the
>tunnel than the instrument panel must be relieved locally. Correct?
Correct.
Regards,
Henk & Bart
Europa #264, PH-BGV
http://www.loginet.nl/europa/
|