Hi all,
Could someone offer some tips here. I can't quite understand how these
things will be used when aligning the aileron quick connect system. The
first problem is that the 1/2" holes are in the wrong place, they seem to be
about 1/8" out when compare to the spar. Could someone help explain the
following:
- What the wooden blocks on the end are for.
- Are the two1/4" holes in the end of these blocks significant.
- How do I actually use these things
- If I fill and re drill the 1/2" holes, which end to I fill, the one close
to the block or the tip ?
Thanks, Paul (363)
|