Re: Counterweight Cable Tension

[Graham Singleton <grasingleton@avnet.co.uk>]

>Terminate one end of each wire on the tailplane tube as instructed.  Feed
>the swages on to the wires at their free ends and attach these to the
>forward lugs on the balance arm but with the swages loose. (Clamp the wires
>temporarily using litle u bolts so you will be able to adjust their tensions
>easily).

Alternatively just clamp the free end adjacent to the swage with a small 
light toggle clamp or Mole Grip. This stops it pulling through and 
loosening before making the swage.

Graham