Eureka, found the cuddle plates EUR010 and Mod 46 is on it's way from
Europa.
Thankyou for all your replies
Alan
#303
----- Original Message -----
From: "Paul & Liz Atkinson" <paulliz@cix.co.uk>
Subject: Re: Cudle Plates
> In article <000701bf809c$badf19a0$24b6989e@grotty>,
> aburrill@bottle-neck.demon.co.uk (Alan) wrote:
> >1. what material is Eur010 the cuddle plates forthe CS09 Pitch Torque
> >Tube
> >Bracket. I don't seem to have any thing labled EUR010.
>
> They are cut from aluminium alloy sheet, about 5mm thick if I remember
> right.
>
> > 2. my end caps CS10C on the Pitch Tube CS10 don't look the same as the
> ones
> > in the XS manual. Mine dish in and have a central piller tube for the
> > bolt
> > that then comes out, those in the manual look like they are domes which
> > fit
> > in the end, difficult to describe I know. I was aware that these end
> > caps
> > were changed for some reason some time ago, how do I tell if I have the
> > right ones.
>
> You have the old ones by the sound of it. The new fittings have a face
> which is flush with end of the tube.
>
> Paul
|