> > 2. my end caps CS10C on the Pitch Tube CS10 don't look the same as the
>ones
> > in the XS manual. Mine dish in and have a central piller tube for the
> > bolt
> > that then comes out, those in the manual look like they are domes which
> > fit
> > in the end, difficult to describe I know. I was aware that these end
> > caps
> > were changed for some reason some time ago, how do I tell if I have the
> > right ones.
>
>You have the old ones by the sound of it. The new fittings have a face
>which is flush with end of the tube.
Those old ones were changed because on 2 occasions one broke. Scrap them.
Graham
|